Panasonic DMR-EZ37V - Manual (Page 71)

71
RQT8849
Ref
erence
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type.  Check the connections and the “Digital Audio Output” settings.
Check the input mode on the amplifier if you have connected one.
42, 52
 Check if TV is muted. −
 Check if amplifier is muted. −
 Press [AUDIO] to select the audio. 20, 26
 Sound is not output while fast-forwarding during chasing playback
and simultaneous record and playback.
−
 Set “V. Surround Sound” in the Audio menu to “Off” in the following
cases:
– When using discs that do not have surround sound effects, such as
Karaoke discs
– When playing analog multi lingual broadcast recordings
35
 The sound effects will not work when the bitstream signal is output
from the DIGITAL AUDIO OUT terminal.
−
Cannot switch audio.  You cannot change the audio type when a DVD-R, DVD-R DL,
DVD-RW (DVD-Video format), +R, +R DL, or +RW disc is in the disc
tray.
−
 You cannot change the audio type when playing a recording of an
analog multi lingual broadcast on a DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, +R DL or +RW disc. You can select “Main”
or “Secondary Audio Program (SAP)” in “Multi-channel TV Sound
(Analog)” in the Setup menu before recording.
13, 15,
42
 Only one language channel is recorded from digital multi lingual
broadcasts, so you will be unable to change languages during
playback.
15
 You have used a digital connection. Set “Dolby Digital” to “PCM” or
connect using an audio cable (analog connection).
42, 52
 There are discs whose audio cannot be changed due to how the
disc was created.
−
Playback Issues Sound
Page