P199) – Panasonic DMC-FX700 User Manual

Page 199

Advertising
background image

- 199 -

Others

> Disconnect the USB connection cable. Connect it again while the card is inserted in the

camera.

> Check if your PC is compatible with SDXC memory cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

> A message prompting to format the card may be displayed when connecting, but do not

format.

> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USB

connection cable after turning off the power.

Pictures cannot be printed using a printer which does not support PictBridge.

> Set to [PictBridge(PTP)] in [USB MODE].

(P29

,

174)

> When using a printer with a Cropping or borderless printing function, cancel this function

before printing. (For details, refer to the operating instructions for the printer.)

> When you order photo studios to print pictures, ask the photo studio if the pictures can be

printed with both ends.

> Touch the [SETUP] menu icon [ ] and then select [LANGUAGE] to set the desired

language.

(P32)

In dark places, the AF Assist Lamp

(P125)

lights red to make it easier to focus on a subject.

Is [AF ASSIST LAMP] on the [REC] Mode menu set to [ON]?

(P125)

The AF Assist Lamp does not turn on in bright places.

The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.

When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.

The card is not recognized by the PC. (The built-in memory is recognized.)

The card is not recognized by the PC. (SDXC memory card is used)

The picture cannot be printed when the camera is connected to a printer.

The ends of the pictures are cut at printing.

Others

An unreadable language was selected by mistake.

A red lamp sometimes turns on when the shutter button is pressed halfway.

The AF Assist Lamp does not turn on.

The camera becomes warm.

The lens clicks.

Advertising