P31) – Panasonic DMC-FX700 User Manual
Page 31
- 31 -
Preparation
•
This will work when the HDMI mini cable (optional) is connected.
•
for details.
•
When it is set to [ON], you can set/cancel favorites by touching [
]
during playback. You can also set favorites from the playback menu. For
details, refer to
.
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI mini cable (optional).
[OFF]:
Operations will be on the camera only.
[ON]:
Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
The operations you can perform on the camera are
limited.
Ü
[FAVORITE]
Marks can be added to pictures, and set up as favorites.
[OFF]/[ON]
[VERSION DISP.]
It is possible to check which version of firmware is on the camera.
[FORMAT]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo