Perfectone Net Ware IP 300 User Manual
Page 20
IP 300 User Manual
20
Note
With Net2phone selected here, please set other necessary parameters: check
use service
option, and then fill IP address or domain name of designated
server into
service addr
field; then set
service port
as
6801
; fill account and
password of Net2phone card into
account
and
pin
fields.
use service:
Enable/disable service by checking/clearing this box.
With H.323 protocol selected, service refers to the gatekeeper. To make
calls through gatekeeper, please check this box; otherwise, phone can only
make IP-to IP calls or calls through gateway.
With MGCP protocol selected, service refers to Call Agent. Always check
this box since there is no way to make calls without a Call Agent.
With SIP protocol selected, service refers to SIP Proxy Server. To make
calls through gatekeeper, please check this box; otherwise, phone can only
make IP-to IP calls.
With Net2phone protocol selected, service refers to Net2phone designated
server. Always check this box to use Net2phone’s service.
Note
Designated
Net2phone server IP address are: 216.53.3.52; 4.43.114.39;
4.43.114.38 or 05.228.245.8. Domain names are: call1.net2phone.com;
call2.net2phone.com;
skip1.net2phone.com;
skip2.net2phone.com;
skip1.f8g9h0.net or skip2.f8g9h0.net.
service type
: This option is used to accommodate the miscellaneous
requirements of the system providers. When IP phone is connected to these
systems, please select the corresponding service type.
register ttl :
With H323 or SIP protocol, IP phone will send a keep-alive
registration message to H323 gatekeeper or SIP proxy server every “
register
ttl
” seconds. The minimum value is 10, maximum value is 255. Default is 60.
Common:
no special requirements
Mediaring:
use Mediaring prepaid card
Etalk:
use etalk prepaid card. When this is selected, please select