Perfectone Net Ware IP 300 User Manual
Page 41
IP 300 User Manual
41
value with INNOPATH private system used; 4: stun. Use this value with
SIP protocol used according to requirement of system; 5: use this value
with vida private system used; 6: aivgr use this value with aivgr private
system used; 7 Eproxy: use Eproxy system.
Set nat ttl XX
When IP phone sit behind a NAT device, it will send packets to server
every “
nat ttl
” seconds to keep the port mapping on the NAT device alive.
“
nat ttl
” is an integer between 10 and 60, default value is 20.
set phonenumber XXXXXXXX
Set a number ofIP-300 IP phone according to systems. Value xxxxx must be
an Arabic numeral and no longer than 16 characters.
set account XXXXXX
With H323 protocol used, while calling card is set, set account of chosen
card; while
local type
is set as 2[H235 account] , set ID; while
set
localtype
is set as
1
, set H323 ID. With MGCP protocol used, please set local name by
this command. With Net2phone system used, set account of Net2phone
card by this command.
set pin XXXXXXXXXX
With H323 protocol used, while calling card is set, set password of chosen