Perfectone Net Ware IP 300 - Manual (Page 33)

IP 300 User Manual
33
C
. Telnet Configuration
On the PC connecting with the phone or on the same segment with the phone,
choose
Start>Run , and then type telnet 192.168.1.100 into Run field in
popuping Run dialog. Or input telnet 192.168.1.100 in the DOS window.
Then the following information will be displayed.
IP 300 V1.38 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary password
(default one is 1234), after Retun, you will see
✁
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, Then you can set
the IP 300 IP phone by using the telnet commands.
IP 300 Telnet Commands Explanation
IP 300 Telnet Commands
Command Function
? Supply command name and parameters
get Display basic parameters of the IP 300 IP phone
set Set parameters of the IP 300 IP phone