Perfectone Net Ware IP 300 - Manual (Page 31)

IP 300 User Manual
31
When debug set as 0[disable], if input ordinary password (default one is 1234), then
following page will pop up after clicking . And only those parameters can
be modified.
Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable]
Save/Reboot: Click this button to save the configuration and the phone will
reboot. Once the phone reboots successfully, the new configuration is effective.
Note After entering set page, if Update button is not clicked within 5 seconds,
then when you click it again, the index page asking for pin will pop up
again. Then please input the password again to enter the set page and
then click
Update button to confirm the modification.
Address Book: Click this button to open the speed dial settings page. Please refer to
Fig 3.7. In this page, you can set and save the speed dial number by typing the name
into the
Name field and then entering the corresponding number following the name.
For example, input Jack in Name field following 001, and then input 5989426454 into
Phone number field. Then Jack’s number 5989426454 is saved in phone book. Then
please click
Save/Back button. In normal state, you can use speed dial to call
numbers saved in phone book.