Appendix a, H8s ports & connections, H8s microcontroller – Pioneer 2TM User Manual
Page 71: Power connector, H8s p, Orts, Onnections, H8s m, Icrocontroller
ActivMedia Robotics
Appendix A
H8S P
ORTS
& C
ONNECTIONS
Figure 23. Mini- and
micro-fit style connector
numbering
This Appendix contains pinout and electrical
specifications for the external and internal ports and
connectors on the H8S microcontroller, motor-power
interface, and User Control boards.
Figure 24. IDC-type connector
b i
Note that layered connectors are numbered
differently, depending on the socket type. IDC ones
are odd and even layers; mini- and micro-fit
connectors use successive-position numbering.
See the Figures nearby for examples.
H8S M
ICROCONTROLLER
Figure 25. ActivMedia’s H8S-based microcontroller
Power Connector
The power connector is a 3-pin microfit socket that delivers 12VDC (battery) to the
microcontroller circuitry and separate, conditioned 5 VDC to the sonar, including power
grounds.
Table 19. H8S Controller Power Connector
PIN
DESCRIPTION
1
12 VDC battery
2
GND
3
Sonar 5VDC
65