Planet Technology Internet Telephony PBX System IPX-300 Series - Manual (Page 11)

In order to connect machine for administration, please
Í
Note locate your PC in the same network segment (192.168.0.x)
of IP PBX. If you’re not familiar with TCP/IP, please refer
to related chapter on user’s manual CD or consult your
network administrator for proper network configurations.
Network Interface quick configurations
Wizard for Quick Setup of the IP PBX, after finishing the authentication, please click “Wizard” to enter
quick start:
Figure 2-2. Wizard-Operating Mode settings
¾ Step1. Operation Mode (For IPX-300W)
For most users, Internet access is the primary application. The IP PBX supports the WAN, LAN and
WLAN interface for Internet access and remote access. When you click “Operation Mode” from within
the Wizard Setup, the following setup page will be show.
Three WLAN modes of operation are available for Internet Access:
AP Mode:
In this mode the IP PBX supports AP functionality only. The IP PBX has the following
network interfaces: WAN, LAN and Wireless LAN.
AP-Client Mode:
In this mode the IP PBX accesses a remote AP. Please be sure that you have an account to
access your wireless service provider AP. In this mode the WAN interface is used a 2nd
LAN interface.
WISP & AP Mode：
11