Planet Technology Internet Telephony PBX System IPX-300 Series - Manual (Page 36)

Í
Note When IP PBX operate in AP-Client Mode, the WAN and LAN RJ-45
interface will be configured as a 2 port switch for connecting
with 2 PCs for access wireless network
WLAN Mode
For wireless connected type 802.11 B/G mixed/ 802.11b only /
802.11G only
Remote AP SSID Define the same as your Wireless Router uses.
Remote AP KEY
Enter the remote AP Authorization Key (WPA-PSK / WPA2-PSK /
WPAPSK ,WPA2PSK Mix Mode to Show)
W-LAN Channel Define the same as your Wireless Router uses.
W-LAN IP Assignment
1. DHCP client
2. Static IP Address
Static IP
Key in the W-LAN IP address, W-LAN Subnet mask and W-LAN
Gateway from AP of WISP
DHCP Client
When the DHCP Client is enabled, the IP PBX will get the IP Address
from Outdoor AP of WISP.
PPPoE Client
Enter User Name / Password provided by your ISP, the IP PBX will
get the IP Address from Outdoor AP of WISP
Remote AP SSID Define the same as your Wireless Router uses
Authentication Method
Define the same as your Wireless Router uses.(OPEN / SHARED
Mode)
Encryption Type
Define the same as your Wireless Router uses. (OPEN / SHARED
Mode)
Scan usable network Select list to remote AP SSID (magnifying glass)
Table 4-6. AP-Client mode description
36