Planet Technology Internet Telephony PBX System IPX-300 Series - Manual (Page 9)

Rear Panel Indicators
Figure 1-3. Rear Panel of IPX-300
Figure 1-4. Rear Panel of IPX-300W
1 12V DC 12V DC Power input outlet
2 Reset
The reset button, when pressed, resets the IP PBX without the
need to unplug the power cord.
3 WAN
The WAN port supports auto negotiating Fast Ethernet
10/100Base-T networks. This port allows your IP PBX to be
connected to an Internet Access device, e.g. router, cable modem,
ADSL modem, through a CAT.5 twisted pair Ethernet cable.
4 LAN
The LAN port allows your PC or Switch/Hub to be connected to the
IP PBX through a CAT.5 twisted pair Ethernet cable.
5
External
Antenna 2db
(IPX-300W only)
Used to Wirelessly Connect to 802.11b/g networks
802.11b: 11/5.5/2 Mbps
802.11g: 54/48/36/24/19/12/6Mbps
Table 1-2. Rear Panel description of IP PBX
9