Panasonic NV-DV2000EC - Manual (Page 12)

12
Editing Controller Setup
Installing the Batteries
1 To remove the cover, slide it in the direction of the
arrow while pressing down.
2 Load the batteries with their polarity (+ and -)
aligned correctly.
3 Slide the cover back on.
Power Source for the Editing Controller
The editing controller is powered by 2 AA, UM3 or R6
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
≥ Load the new batteries with their polarity (+ and -)
aligned correctly.
≥ Do not apply heat to the batteries, or an internal
short-circuit may occur.
≥ If you do not intend to use the editing controller for a
long period of time, remove the batteries and store
them in a cool, dry place.
≥ Remove spent batteries immediately and dispose of
them.
≥ Do not use an old and a new battery together, and
never use an alkaline battery with a manganese
battery.
≥ Do not use rechargeable batteries.
7
8
d
d
e
e
Inserting the Cassette/
Child Lock Function
Be sure to insert the cassette with the window side
facing upwards until it is taken into the VCR.
Press EJECT and remove the cassette from the video
unit.
Child Lock Function
When you do not want other people to operate the VCR.
Holding down OK and MARK IN until “!" ” and “hold”
appears more than 5 seconds in the VCR display will
deactivate all buttons. Any external commands will not
be processed by the VCR.
To cancel this function, repeat the same procedure until
“!"” and “hold” disappears.
≥
If a button is pressed while the Child Lock function is
on, “!" ” and “hold” appears in the VCR display.
≥ When the power is disconnected, the Child Lock
function is automatically cancelled after backup time.
DIGITAL VCR