Panasonic NV-DV2000EC - Manual (Page 40)

40
Notes:
¡ Although Assemble editing can be performed in LP
mode, Insert, Audio Dubbing, and Audio Mixing
cannot be performed with a tape recorded in LP
mode. It is necessary to first copy the tape in SP
mode.
¡ In order to ensure that the editing operation is
performed properly, the editing points should be set at
least 20 seconds after the beginning of the tape.
¡ When using the Editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 4), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
One-Touch Assemble
If the One-Touch Edit function is used, Assemble editing can be performed by controlling the playback unit through
the NV-DV2000.
Preparations
≥
Confirm that the TV is on and the VCR viewing
channel is selected.
≥ Complete necessary connections and settings.
[
R28–35]
≥ Set One-Touch-Edit to ON on Edit functions menu.
[
R37]
Operations
1
Press JOG/SHUTTLE on the Editing controller, and
check that the button is lit.
2 Search for the edit start point on the recording
VCR.
3 Press ¥ (REC).
≥
The picture from the playback unit appears on the
screen.
4 Search for the edit start point on the playback unit.
5 Press JOG/SHUTTLE on Editing controller.
≥
Editing begins.
≥ To continue editing, press JOG/SHUTTLE on the
Editing controller, and repeat steps 4–5.
6 Press ∫ (STOP) on the Editing controller to stop
editing.
DIGITAL VCR
1,5
2,4 6 3
Q P