Panasonic NV-DV2000EC - Manual (Page 34)

34
Notes:
≥
Do not change the Edit Terminal or Edit Mode
settings while performing setting or editing operations
on the SET UP or EDIT MENU screens. Be sure to
exit these screens before changing these settings.
≥ When using this VCR as the recording VCR and
performing editing by connecting the units via the AV
cables or a 21-pin Scart cable, the On Screen Display
(date/time, Time Code) may scroll vertically when still
playback or slow playback are performed by the
playback VCR.
¡ Before connecting any cables, first make sure that the
both units turn off.
¡ Insert a recorded cassette into the playback unit, and
a cassette with the closed record prevention tab into
the VCR.
¡ The NV-DV2000 cannot be controlled through video
equipment with a LANC socket.
Connecting a Video Equipment with a LANC
Socket
Example for connecting another manufacturer’s video equipment with a LANC terminal (L control) as the playback
unit, when controlling the playback unit through the VCR.
DV2 DV SELECT
1
2
EDIT 8mm ¥
AV4
IN
EDIT CONTR EDIT CONTROL OL RECORDER
PRINTER/
D.STILL PICTURE
PLAYER PASSIVE EDIT DV 8mm
S-VIDEO VIDEO L/MONO-AUDIO-R
Playback Unit
with a LANC socket
(8mm Video Camera etc.)
8mm
¡ Some types of LANC sockets have a different shape
to the LANC socket on the NV-DV2000.
¡ If an attempt is made to perform an operation through
the NV-DV2000 that the playback unit does not
support, the unit may operate incorrectly.
¡ If the playback unit is connected to the recording unit
via an S-VIDEO cable, the video signal on the
S-VIDEO cable takes priority. If the playback unit
does not have an S-VIDEO socket, do not connect
the S-VIDEO cable to the NV-DV2000.
¡ When the units are connected using the DV cable and
editing is performed, some editing functions will differ
compared with when the units are connected using
the AV cables. Refer to Glossary of Terms on [
R58].
¡ Read the operating instructions of the playback unit.
AV1 (Rear)