Panasonic NV-DV2000EC - Manual (Page 29)

29
Preparations for Editing
Playback Unit
(Digital Video Camera)
1 Turn on the DVC.
2 Make the Time code appear on the LCD monitor or
the viewfinder.
3 Prepare the tape for playback.
Recording Unit
(the NV-DV2000)
1 Turn on the VCR.
2 Set Edit Mode to RECORDER.
3 Set Edit Terminal to EDIT.
4 Press INPUT SELECT so that DV1 or DV2 after
sliding DV SELECT switch 1 or 2, is selected.
≥
When performing Audio Dubbing or AV Insert,
select A2, A3 or A4.
Notes:
≥
When using a Panasonic Digital Video Camera as the
playback unit, the following editing functions can be
used by connecting the camera to the NV-DV2000
with just a DV cable:
Copying (See page 43 after seeing page
25.)
Video Insert (See pages 44 and 48 after seeing
page 25.)
Audio Insert (See pages 44 and 48 after seeing
page 25.)
Assemble (See pages 40 and 46 after seeing
page 26.)
except Audio Dubbing, Audio Mixing and AV
Insert
In this case, simply set INPUT SELECT to DV1 or
DV2, and set Edit Terminal to DV.
(This function may not operate properly with some
models.)
≥ Use Time codes for Programme Editing when the
playback unit is connected to the NV-DV2000 via only
a DV cable.
≥ Select the DV SELECT switch setting in accordance
with the connected socket.
DV2 DV SELECT
1
2
EDIT 8mm ¥
AV4 V4
IN
EDIT CONTR EDIT CONTROL OL RECORDER RECORDER
PRINTER/ PRINTER/
D.STILL PICTURE .STILL PICTURE
PLAYER PASSIVE ASSIVE EDIT DV 8mm
S-VIDEO VIDEO L/MONO-AUDIO-R
2 3
4
NV-DV2000