Paradyne JetFusion Integrated Access Device - Manual (Page 35)

2000-A2-GB20-10 - 16 - February 2004
4.Type your password and press Enter to display the Main menu.
Using the
Menu
Interface
The JetFusion IAD provides an ANSI-terminal-based menu interface for
system configuration and monitoring. When you log in, the IAD displays
the Main menu.
The commands displayed in some menus (including the Main menu) differ,
depending on the level at which you log in.
Figure 2–4 on page 17 displays
the Main menu when you log in at the Supervisor security level. Figure 2–
5 on page 17 displays the Main menu when you log in as Network
Administrator, and Figure 2–6 on page 17 displays the Main menu when
you log in as User.
*****************************************
Main Menu
*****************************************
1. Reports Menu
2. Configure IP Router
3. Configure Bridge
5. Configure WAN
6. Configure LAN
7. Configure SNMP
8. Configure Login
9. System Utilities
D. Configure DHCP Server
N. Configure NAT
T. Telephony Clock Recovery
Z. Diagnostics Menu
C. Command Line Interface
R. Reset System
P. Voice Path Configure
NOTE The user ID and password transmit as clear text, which may
be captured by unauthorized individuals. If you are concerned
with network security, you may not want to use Telnet to
configure the IAD.