PreSonus Inspire 1394 - Manual (Page 16)

INSTALLATION
16
Macintosh OSX (10.3.7 or later):
The audio drivers for the INSPIRE 1394 are included in CORE AUDIO for Macintosh OSX
10.3.7 and later.
Once you have verified that you are running OSX 10.3.7 or later, connect your INSPIRE 1394 to a
1394 port on your computer (power for the unit will be supplied via the 1394 cable). Your
INSPIRE 1394 sync light should flash red and then stay blue to indicate that your INSPIRE 1394
is properly sync’d to your computer.
Once you have connected the INSPIRE 1394, follow these instructions to install the software:
1.) Insert the INSPIRE 1394 Driver/Software CD in the CD drive of the computer.
2.) Browse the contents of the CD to find and copy the folder named ‘Macintosh’ to your hard
drive.
3.) Find the ‘Macintosh’ folder you copied from the INSPIRE 1394 driver CD. Look for the
Control Panel icon and double-click on it. This will open the INSPIRE 1394 Control Panel, from
which you can digitally control your INSPIRE 1394.