PreSonus Inspire 1394 - Manual (Page 36)

TECHNICAL INFORMATION
36
No Sync (Red) – Macintosh Users –Open Audio MIDI Setup and change the Format sample rate
speed to anything different. This will re-establish synchronization and the Blue sync light will turn
on. Once you have the blue sync light you can then reset the Format sample rate to your desired
setting.
Audio Drop Outs – Can occur when the speed of your processor cannot buffer audio fast enough.
Windows XP – Try lowering your INSPIRE 1394’s CPU to a lower setting, by right clicking on
the INSPIRE 1394 control panel icon in your system tray.
Preamplifier
Q: I have a microphone plugged into channel one (or two) but I am not getting any signal.
Possible Solutions:
1. Check your mic cable.
2. Make sure the microphone does not require phantom power. If it does press the 48v button.
Power Issues
Q: I just bought a INSPIRE 1394 from (dealer name goes here) in (city and state go here) and I
live outside of the United States. I need to service my unit- what do I do?
A: PreSonus has a distributor in almost every country. Therefore, PreSonus does not authorize or
condone exportation of any of our products by US dealers. If you have done this and your product
has been damaged (more than likely due to voltage irregularities) then you will need to return the
unit to the dealer in the United States. The dealer can then return it to PreSonus for a non-warranty
repair. After the unit is repaired, the dealer will be billed accordingly and the unit will be returned
to the dealer.
Cubase LE
For help with Cubase LE press F1 while running Cubase LE to open the operation manual.