PreSonus Inspire 1394 - Manual (Page 29)

APPLICATIONS
29
Mac:
1.) Chain another INSPIRE 1394 via a 1394 cable to the
available 1394 port on the existing INSPIRE 1394.
2.) You should have a blue sync light on both of the INSPIRE
1394’s connected.
3.) Open the INSPIRE 1394 Control Panel and look at the Unit
Selector. You should now be able to rename the new device
so you can identify it.
4.) Repeat steps 1-3 to add up to two more INSPIRE 1394’s.
Note that you can rename each unit, using up to six characters per name.
The names you give each unit will remain until changed again, even if the
units are connected to another computer.