Pitney Bowes W983 - Manual (Page 11)

8 SV61228 Rev. A
W983 Stacker/W863 Dryer Operating Guide
The illustration above shows the location of these stand components.
1 Height Adjustment Knob - used to adjust the height of the
stacker so it can be aligned with your printer or to operator level.
2 Casters (in circles above) - allows for easier movement of
stacker. Two are locking casters for holding the stacker in place.
1
Optional Stand for Power Stacker
2
WARNING: The Stacker (when used with the Dryer)
requires its own separate 15 amp branch circuit for
power. Do not plug other appliances (such as your
printer) into the same circuit as the Stacker/Dryer.
Stacker_Dryer Op Guide Book.indb 8 Stacker_Dryer Op Guide Book.indb 8 3/30/2004 10:26:44 AM 3/30/2004 10:26:44 AM