Pitney Bowes W983 - Manual (Page 9)

6 SV61228 Rev. A
W983 Stacker/W863 Dryer Operating Guide
1 Media Stop - This plate is adjusted so that mailpieces from the
printer hit the stop and drop flat onto the conveyor belt. The
height adjustment handles materials of varying thicknesses.
2 Stacker Full Arm Fixture - Sets the stop position for mailpieces
on the ramp and raises/lowers full arm.
3 Stacker Full Arm - This arm is adjusted so that the mailpieces
stack in an orderly sequence for retaining presort order and stop
the printer when the Stacker is full.
4 Hold Down Springs and Rollers - These springs and rollers are
adjusted to keep the mailpieces in contact with the conveyor belts.
1
2
3
4
Conveyor Deck
Stacker_Dryer Op Guide Book.indb 6 Stacker_Dryer Op Guide Book.indb 6 3/30/2004 10:26:43 AM 3/30/2004 10:26:43 AM