Planet Technology Network Device WAP-5100 - Manual (Page 17)

- 13 -
3.3.1.7 Change IP Settings
This function allows you to change the IP address of a specific device. Highlight the MAC address of
the device from the list, open the Tools menu and select Change IP Settings, or click on the icon
, a dialog box will pop up as below. Please note the modified IP address must be in the same
subnet as Local Computer; otherwise the OK button remains unavailable. The default password of
WAP-5000 is admin.
3.3.1.8 Change Password
This function allows you to change the administrative password of the device. Highlight the MAC
address of a device from the list, open the Tools menu and select Change Password, or click on
the icon , a dialog box will pop up. Type the Old Password, New Password, and confirm New
Password again, then click OK button to close the box and apply the changes to the device.
3.3.1.9 Reboot
This function allows you to reboot the device without unplugging its power adapter. Highlight the
MAC address of a device from the list, open the Tools menu and select Reboot, or click on the icon
, a dialog box will pop up and ask for the administrative password. Type in the correct password,
then click OK button to close the box and reboot the device.