Planet Technology Network Device WAP-5100 User Manual
Page 33
- 29 -
Step 3: Execute the test and evaluate the performance
After all the parameters have been properly entered, click Start on the right side of the window to
execute the test. Test results are immediately presented as a three-dimension graphic.
During the antenna alignment test, the bridge might receive interference owing to some unexpected
reason. Under this circumstance, the wireless communication data rate will automatically fall back.
The numbers of packets sent or received at different data rates can be viewed as shown below .
Step 4: Save the test results to a file
The tests may be repeated as described in Step 3 until the antenna is aligned at the optimum
position. Then store the test configuration and test results in a file for later use. Click the Save
Current Alignment Info icon on the toolbar to open the Save As box.
A previously saved test data file can also restored back and shown in the window. Use the previously