Planet Technology Network Device WAP-5100 - Manual (Page 18)

- 14 -
3.3.1.10 Restore Default
This function allows you to restore default settings of the device. Highlight the MAC address of a
device from the list, open the Tools menu and select Restore Default, or click on the icon , a
dialog box will pop up and ask for the administrative password. Type in the correct password, then
click OK button to close the box and restore default settings.
3.3.2 Hosts View
Hosts View is the major part of the WMS. It supports not only individual remote management, but also
batch mode operation, including multi-monitor, batch upgrade, batch reset, and batch load default
settings. Batch mode operation can efficiently reduce administrative efforts when deploying multiple
WAP-5100s.
Open Start menu and select Start Hosts View, or click on the icon from the main WMS window,
then the Hosts View window appears as below.
3.3.2.1 Auto Discovery
This function helps you to quickly locate all compatible devices in the same IP subnet as the
administrative PC. Open the Host menu and select Auto Discovery, or click on the icon , or
press F5. Few seconds later, all compatible devices will be listed below with their information.
3.3.2.2 Monitor Device
This function allows you to view the status, statistics, and other configuration information of
WAP-5100. Open the Host menu and select Monitor, or click on the icon , a monitoring window