Panasonic KX-TG1840NZ - Manual (Page 17)

Making/Answering Calls
17
Answering calls using the
handset
1 Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer a call by pressing
any dial key from {0} to {9}, {*}, {#},
or {INT}. (Any key answer feature)
2 When finished talking, press {ih} or
place the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press {C}. To turn this feature on, see
page 28.
To adjust the ringer volume when an
outside call comes in
Press {e} or {v} when an outside call
comes in.
Note:
L The ringer volume cannot be adjusted if
the handset is on the base unit.
Answering calls using the
base unit
1 Press {s}.
2 When finished talking, press {s}.
To adjust the ringer volume
Press {
>} or {<} when a call is received or
when the base unit is in standby mode. 4
volume levels (high/medium/low/off) are
available. To turn the ringer volume off,
press and hold {
<} until the base unit
beeps. To turn the ringer volume on again,
press {
>}.
Note:
L When the ringer volume is turned off, U is
displayed on the base unit.
L When the ringer volume is turned off, the
base unit will not ring for outside calls and
it will ring at the low level for intercom
calls.
L When the message alert feature is on
(page 44), the base unit will beep even if
the ringer volume is turned off.
To change ringtones
You can change the ringtone used by the
base unit.
1 Press { >} or {<} when the base unit is
in standby mode.
2 Press { <} or {>} repeatedly to
select the desired ringtone, then press
{5}.