Other options – Panasonic KX-TG1840NZ User Manual
Page 34
Base Unit Settings
34
1
Press {j/OK}.
2
Select “Base Unit Setup”, then
press {>}.
3
Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
34).
4
Select “Call Options”, then press
{>}.
5
Select “Call Bar”, then press {>}.
6
Select “On” or “Off”, then press {>}.
7
Press {ih}.
Other options
Changing the base unit PIN
(Personal Identification Number)
For security, the base unit PIN must be
entered when changing certain settings. The
default PIN is “0000”.
Important:
L If you change the PIN, please make note
of your new PIN. The unit will not reveal
the PIN to you. If you forget your PIN,
consult your nearest Panasonic service
centre.
1
Press {j/OK}.
2
Select “Base Unit Setup”, then
press {>}.
3
Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it.
4
Select “Other Options”, then press
{>}.
5
Select “Base Unit PIN”, then press
{>}.
6
Enter the new 4-digit base unit PIN, then
press {j/OK}.
7
Press {ih}.
Resetting the base unit to its
default settings
1
Press {j/OK}.
2
Select “Base Unit Setup”, then
press {>}.
3
Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
34).
4
Select “Other Options”, then press
{>}.
5
Select “Reset Base”, then press {>}.
6
Select “Yes”, then press {>}.
7
Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 30, 43
– Base unit ringtone
– Base unit ringer volume (Medium)
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries
– Repeater mode
– Recordings, including your greeting
message, caller messages, voice
memos, audible call announcements,
and recorded conversations