Answering system, Turning the answering system on/off, Greeting message – Panasonic KX-TG1840NZ User Manual

Page 38

Advertising
background image

Answering System Features

38

Answering system

This unit contains an answering system
which can answer and record calls for you
when you are unavailable to answer the
phone. You can also record your own voice
memos (page 41) and phone conversations
(page 15).

Important:
L Only 1 person can access the answering

system (listen to messages, record a
greeting message, etc.) at a time.

L When callers leave messages, the unit

records the day and time of each
message. Make sure the date and time
have been set (page 11).

L The unit’s answering system will not

answer incoming calls on your FaxAbility
number.

Memory capacity

The total recording capacity (including your
greeting message, caller messages, voice
memos, audible call announcements, and
recorded conversations) is about 15
minutes. A maximum of 64 messages can
be recorded.

Note:
L If message memory becomes full:

“Answer Sys. Full” is shown on the

handset display

– the answer on indicator on the base unit

flashes rapidly

– the total number of recorded messages

flashes on the base unit display

Erase unnecessary messages (page 40).

L Messages are retained even if a power

failure occurs.

Turning the answering
system on/off

Using the base unit

Press {Answer on} to turn on/off the
answering system.
L When the answering system is turned on,

the answer on indicator lights.

L When the answering system is turned off,

the answer on indicator turns off and the
unit automatically plays new messages, if
any.

Using the handset

1

Press {j/OK}.

2

Select “Answer System”, then press
{>}.

3

Select “Answer On” or “Answer Off”,
then press {>}.

4

Press {ih}.

Note:
L When the answering system is turned on,

u is displayed.

Greeting message

When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or use a
prerecorded greeting message.

Recording a greeting message

You can record your own greeting message
(2 minutes and 30 seconds max.).

Using the base unit

1

Press and hold {

d} for about 1 second.

Advertising