Display setup – Panasonic KX-TG1840NZ User Manual
Page 27
Handset Settings
27
6
Select the desired setting, then press
{>}.
7
Press {ih}.
Note:
L When the answering system answers the
call, this feature does not work.
Selecting categories to bypass night
mode
1
Press {j/OK}.
2
Select “Handset Setup”, then press
{>}.
3
Select “Ringer Setup”, then press
{>}.
4
Select “Night Mode”, then press {>}.
5
Select “Select Category”, then
press {>}.
6
Press the desired category numbers,
then press {j/OK}.
L The selected category number will
flash.
L To cancel a selected category
number, press the number again. The
number will stop flashing.
7
Press {ih}.
Note:
L If a call is received from one of the
categories set to bypass night mode, the
handset will ring.
Display setup
Selecting the standby mode
display
“Base Number”: The current base unit
number is displayed.
“Handset Number”: The current handset
number is displayed.
“Off”: Only the current date and time are
displayed.
1
Press {j/OK}.
2
Select “Handset Setup”, then press
{>}.
3
Select “Display Setup”, then press
{>}.
4
Select “Standby Display”, then
press {>}.
5
Select the desired setting, then press
{>}.
6
Press {ih}.
Note:
L If “Base Number” is selected and the
current base unit number is 2, “-2-” is
displayed.
L If “Handset Number” is selected and the
current handset number is 2, “[2]” is
displayed.
Changing the display language
1
Press {j/OK}.
2
Select “Handset Setup”, then press
{>}.
3
Select “Display Setup”, then press
{>}.
4
Select “Select Language”, then
press {>}.
5
Select the desired language, then press
{>}.
6
Press {ih}.
Note:
L If you select a language you cannot read,
press {ih}, {j/OK}, press {e} 2
times, press {>}, press {v} 2 times,
press {>}, press {v}, press {>}, select
the desired language, then press {>}.
Press {ih}.
Changing the display contrast
1
Press {j/OK}.