Panasonic AJ- E - Manual (Page 91)

7
Chapter 7 Menu description tables
91
7-4-2 VF MARKER
Item/
Data storage
Variable
range
Remarks
TABLE A
B For selecting the VF MARKER setting table.
This item is used to set the current values of
table A or B which have been selected using
the menu items listed below.
CENTER MARK OFF
1
2
3
4 For selecting the center marker.
OFF: The center marker is not displayed.
1:
+ (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
SAFETY ZONE OFF
1
2 For selecting the type of safety zone frame.
OFF: The safety zone frame is not displayed.
1:
Box
2: Corner frames
SAFETY AREA 80%
:
90%
:
100%
For setting the position of the safety zone.
FRAME SIG 4:3
13:9
14:9
VISTA For setting the frame marker.
Note that this setting takes effect only when
REC MODE is set to 16:9.
The VISTA setting is 16:8.65.
FRAME MARK ON
OFF For selecting ON or OFF for the frame
marker.
FRAME LVL 00
:
15
For setting the level of the frame marker.
0:
Equivalent to signal OFF
15: Same brightness as center area
However, this setting has no effect if
FRAME SIG is set to VISTA.
USER BOX ON
OFF For setting whether or not to display the user
box.
7-4-3 USER BOX
Item/
Data storage
Variable
range
Remarks
USER BOX WIDTH 001
:
013
:
100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT 001
:
013
:
144
For setting the vertical height of the user box.
USER BOX H POS –50
:
+00
:
+50
For setting the horizontal position of the user
box center.
USER BOX V POS –144
:
+000
:
+144
For setting the vertical position of the user box
center.
7-4-4 VF INDICATOR1
Item/
Data storage
Variable
range
Remarks
EXTENDER ON
OFF For selecting ON or OFF for the extender
display.
SHUTTER ON
OFF For selecting ON or OFF for the shutter speed
display.
FILTER ON
OFF For selecting ON or OFF for the filter No.
display.
WHITE ON
OFF For selecting ON or OFF for the AWB
PRE/A/B display.
GAIN ON
OFF For selecting ON or OFF for the currently
selected gain, S.GAIN and DS.GAIN display.
IRIS OFF
IRIS
S+IRIS
S OFF: Neither the super iris ON status nor
the aperture value is displayed.
IRIS: Only the aperture value is displayed.
S+IRIS: Both the super iris ON status and
aperture value are displayed.
S: The super iris ON status is displayed.
(The display or non-display of the aperture
value and that of the iris override are linked.)
CAMERA ID BAR
CAM
ALWAYS
OFF For setting the ID configuration during
recording.
BAR:
The ID is recorded when color bar
signals are provided.
CAM: The ID is recorded when the camera
images are provided.
ALWAYS: The ID is recorded at all times.
OFF:
The ID is not recorded at any time.
<Note>
If ON is selected as the ID MIX INH menu
item setting on the OPTION screen, it is not
possible to record the camera ID when the
images of the camera are to be recorded
even if CAM or ALWAYS is selected as this
menu item’s setting.
ID POSITION UPPER R
UPPER L
LOWER R
LOWER L For setting the location where the camera ID
is to be recorded.
UPPER R: Top right
UPPER L: Top left
LOWER R: Bottom right
LOWER L: Bottom left
ZOOM LVL ON
OFF For selecting ON or OFF for the zoom
position display.
COLOR TEMP ON
OFF For selecting ON or OFF for the color
temperature display.
DATE/TIME ON
OFF For specifying whether or not the date and
time are mixed simultaneously when the
CAMERA ID is recorded.
The underlining in the variable range column indicates the setting in the preset mode.
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E