Panasonic AJ- E - Manual (Page 92)

Chapter 7 Menu description tables
92
D.ZOOM ON
OFF For selecting whether or not the display is to
come on during digital zoom operations.
7-4-5 VF INDICATOR2
Item/
Data storage
Variable
range
Remarks
TAPE ON
OFF For selecting ON or OFF for the remaining
tape amount display.
BATTERY ON
OFF For selecting ON or OFF for the battery
voltage display.
AUDIO LVL ON
OFF For selecting ON or OFF for the audio level
meter display.
TC TCG
TCR
TCG/TCR
OFF For selecting the time code which is to be
displayed.
TCG:
The time code generator value is
displayed in the E-E mode.
TCR: The time code reader value is
displayed in the V-V mode.
TCG/TCR: The time code generator value is
displayed in the E-E mode, and the
time code reader value is displayed
in the V-V mode.
OFF: The time code is not displayed at
any time.
VTR WARNING ALWAYS
NORMAL
OFF For selecting how VTR warnings are
displayed.
ALWAYS: It is displayed every time a warning
has occurred.
NORMAL: It is displayed for 3 seconds when a
warning has occurred and also for 3
seconds after recording has started
and after recording has finished.
OFF: It is not displayed at any time.
SAVE LED SAVE&
TAPE
SAVE
For setting the operation of the SAVE lamp.
SAVE&TAPE:
The lamp lights up when the VTR
SAVE/STBY switch has been set to the
SAVE position. It is off during recording.
As the tape is approaching the end, it
starts flashing in tandem with the warning
alarm.
SAVE: The lamp lights up when the VTR
SAVE/STBY switch has been set to
the SAVE position. It is off during
recording.
STATUS ON
OFF For setting whether or not to display the status
when the MODE CHECK switch is used.
7-4-6 MODE CHECK IND
Item/
Data storage
Variable
range
Remarks
!LED ON
OFF For setting whether or not to display the
cause display screen if the !LED has lighted
when the MODE CHECK switch is used.
FUNCTION ON
OFF For setting whether or not to display the
function display screen when the MODE
CHECK switch is used.
AUDIO ON
OFF For setting whether or not to display the audio
display screen when the MODE CHECK
switch is used.
P.ON IND ON
OFF For setting whether or not to display the
status display screen after the power has
been turned on.
ATW ON
OFF For selecting whether or not the display is to
come on when ATW is ON.
7-4-7 !LED
Item/
Data storage
Variable
range
Remarks
GAIN(0dB) ON
OFF For selecting whether or not the display is to
come on when the gain is other than 0 dB.
GAIN (–3dB) ON
OFF For selecting whether or not the display is to
come on when the gain is other than –3 dB.
DS.GAIN ON
OFF For selecting whether or not the display is to
come on when the DS.GAIN (cumulative gain)
has been entered.
SHUTTER ON
OFF For selecting whether or not the display is to
come on when the shutter is ON.
WHITE PRESET ON
OFF For selecting whether or not the display is to
come on when the AWB CH is set to PRESET.
EXTENDER ON
OFF For selecting whether or not the display is to
come on when the lens is in the extender mode.
25M/50M
SDC905
OFF
25M
50M For selecting whether or not the display is to
come on when the 25M or 50M mode is
established.
BLACK STR ON
OFF For selecting whether or not the display is to
come on when BLACK STRETCH is being used.
MATRIX ON
OFF For selecting whether or not the display is to
come on when MATRIX is ON.
COLOR
CORRECTION ON
OFF For selecting whether or not the display is to
come on when COLOR CORRECTION is ON.
FILTER ON
OFF For selecting whether or not the display is to
come on when a filter other than the 3200K
filter is selected.
SUPER V ON
OFF For selecting whether or not the display is to
come on when SUPER V is ON.
The underlining in the variable range column indicates the setting in the preset mode.
<Note>
When “ON” has been selected for both the GAIN (0 dB) and
GAIN (–3 dB) settings, the GAIN lamp will light when the gain
is neither 0 dB nor –3 dB.
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E