Panasonic VB-43320 User Manual

Page 20

Advertising
background image

Panasonic@

June

DBS Release Notes

CPC-EX, Version 1 .O (Preliminary)

Notes

You can program the

ring select comand into an FF key. Pressing the key

toggles between “Analog Port RING” and “Key Tel RING”. When the analog port
is set to ring, the FF key LED lights red. When the key telephone is set to ring, the
LED is off.

Phone Restrictions

l

The Analog Adapter will work on the large-display phone only (VB-44225).

l

A dial-pulse SLT will not function on the analog port.

l

Stutter Dial Tone (indicating Call-Forwarding mode, Do-Not-Disturb mode,
etc.) will not function on an SLT connected to the Analog Adapter.

l

An analog phone connected to the Analog Adapter cannot program or access
speed dials.

Incoming Calls

l

You cannot program both devices to ring simultaneously.

l

The

code will not work if the other device is in use.

l

The

code will not work if

is set to “0”.

l

If set to “Analog port RING”, the large-display phone will work like an

(no page announcements, no voice calls from other extensions, etc.).

l

If the phone is in

(Call-Forward or Do Not Disturb), the phone will

remain in

even if the ringing device is changed via the 1 code.

l

The incoming ring pattern for the analog device is the same as for the digital

key telephone (determined by the Extension Ring Pattern in FF3

If this address is set to “0” (determined by CO), the analog device will

automatically default to “1 second ON, 3 seconds OFF.”

Ring Patterns Not Applicable to Analog Device.

The following ring pattern

addresses

not

affect the analog device:

Analog Transfer Ring Pattern

SLT DISA Ring Pattern

(0 or

Inbound Ring Pattern

FF2

(0-9)#

Flash Interaction.

Any disconnect signal sent to the analog port must be greater

than the SLT Flash Control; otherwise the disconnect signal will be interpreted as
a flash and the call will be placed on hold.

Programming Addresses That Affect the Analog Device.

The following

addresses will control the analog device, but will not affect the digital key
telephone:

AEC Disconnect Duration

SLT Flash Control

(0 or

New Phone Features

l

Page 21

Technical Manuals Online! - http://www.tech-man.com

Advertising