Panasonic VB-43320 User Manual
Page 43
Release Notes
Panasonic@
CPC-EX, Version 1 .O (Preliminary)
June
Notes
l
The Operator Access address applies only to DBS systems using the new
(1995) NANP dialing plan (FF7
and to TRS types 2-6
types 0
and 1 do not allow outbound dialing; TRS type 7 allows all dialing).
l
If “O-only”, “00-only”,
or
calls are
restricted (settings 0 or
the system will wait 6 seconds before automatically
disconnecting the call. However, if the user dials additional digits within 6
seconds, the DBS will check other switches to determine whether to allow or
deny the call.
l
For all settings
the system will check the Equal Access Code Format
switch (FF7
if a CIC (carrier identification code) is dialed to reach a
preferred inter-exchange carrier.
l
For all settings
the system will check the international calls switches (FF7
and FF7
if “01
or
is dialed.
l
For settings 2 and 3, the system will not consider TRS settings for the trunk.
Page 44
l
Modification to Toll Restriction Service
Technical Manuals Online! - http://www.tech-man.com