Panasonic VB-43320 - Manual (Page 32)

Panasonic@
June
Release Notes
CPC-EX, Version 1 .O (Preliminary)
Programming The following new addresses apply to CPC-EX Serial Port 2. (The addresses that
control the SMDR port remain at
thru
to program the DBS to perform Parity Check on Serial Port
O=Parity check
check ON
to specify Parity Count for Serial Port 2 (if Parity Check is ON in the
above address)...
(0 or
O=Odd count,
l=Even parity count
to specify Baud Rate for Serial Port
bits per second (bps)
bps
bps
bps
to specify Stop Bit Length for Serial Port
bit
bits
1
Additional Serial Port on CPC Card
l
Page 33
Technical Manuals Online! - http://www.tech-man.com