Setting modified for smdr, Programming, Related programming – Panasonic VB-43320 User Manual
Page 47
Release Notes
CPC-EX, Version 1 .O (Preliminary)
June
Setting Modified for SMDR
Values have been redefined for the SMDR Start Timer. The following table shows the new values.
Note: These new values apply to CPC-EX only.
Programming
to specify the SMDR Display Start Timer for CO Calls...
(O-1
0 = 4sec
6 = 16
1 = 6
2 = 8
8 = 20
3 = 10
9 = 25
4 = 12
10 = 30
5 = 14
Related Programming
l
(System): SMDR Print
l
(System): Parity Check
l
(System): Odd/Even Parity
l
(System): Baud Rate
l
(System): Stop Bit Length
l
(System):
Length
l
(System): Serial Port Flow Control (X On/ X Off)
l
(System): SMDR Display Start Timer for CO Calls
l
(System): SMDR Printing Mode 1: Outbound, Inbound, Network
l
(System): SMDR Printing Mode 2: Long Distance and Local Calls
l
(System): SMDR Printing Mode 3: Header Title
l
FF3 (Extension) Station Message Detail Recorder (SMDR) Report
Page 48
l
Modifications to SMDR
Technical Manuals Online! - http://www.tech-man.com