Chapter 3 service configuration, 3 service configuration – Planet Technology ISDN Internet Telephony PBX System IPX-1800N User Manual
Page 18
Advertising
PLANET IP PBX user’s manual
3 Service
Configuration
This section describes details to configure various services built in the PLANET IP PBX.
3.1 NTP
Service
Select Service -> NTP Service to specify a NTP server for network time synchronization. You can
enable or disable NTP service at any time.
Enable NTP Service
1. Click
Enable.
2. Select
Automatic check box to use server pool at
pool.ntp.org; or, enter a fully qualified domain name or the
IP address of a NTP server.
3. Click
APPLY.
Disable NTP Service
Click Disable, and click APPLY.
3.2 SNMP
Service
Select Service -> SNMP Service to specify Simple Network Management Protocol (SNMP)
parameters for network status retrieval. You can enable or disable SNMP service at any time.
Advertising