Planet Technology ISDN Internet Telephony PBX System IPX-1800N - Manual (Page 23)

PLANET IP PBX user’s manual
3.6 IP PBX Service
In Service -> IP PBX Service, you can click the Service & Configuration tab to reload, backup,
restore, restart or revert the IP PBX configuration, or click the Advance tab for the IP PBX parameters
settings.
3.6.6 Service & Configuration
Select Service -> IP PBX Service, and then click the Service & Configuration tab.
Reload IP PBX
Configuration
Click RELOAD, and IP PBX will reload the configuration once
there is no active call. If there is any active call, it will retain up
to 3 minutes, and then IP PBX will reload. This is the most
frequently used function in this page since any IP PBX
configuration change has to be reloaded to take effect.
Backup IP PBX
Configuration
Click BACKUP, and IP PBX archives and encrypts current
configuration into a time-stamped backup file under tftpboot root
directory. To secure configuration files, download them to a
local host through the GET FILE function in Service -> TFTP
Service once a while. Clear PBX Settings Only check box,
both PBX and system (interfaces and services) settings will be
archived in the backup file.
Note: Do not change the configuration file name, or the
RESTORE function will reject the configuration file.
Restore IP PBX
Configuration
Click a configuration backup file in the list, click RESTORE, and
IP PBX will restore the configuration as current setup. Go to
Service -> IP PBX Service, and click RESTART to activate the