Connections to a set top box, etc, Radio antenna connections, Getting s tar te d – Panasonic SC-BTX70 User Manual

Page 10

Advertising
background image

10

RQT9479

Connections to a Set Top Box, etc.

Use the following connections when you want to output the original surround audio from your Set Top Box, cable TV, VCR, DVD recorder, etc.
through this unit’s speakers.
Do not connect through the video cassette recorder.

Due to copy guard protection, the picture may not be displayed properly.

≥Turn off all equipment before connection.

Radio antenna connections

≥Keep loose antenna cables away from other wires and cables.

OPTICAL

OUT

OPTICAL 2(STB)

TV

Optical digital
audio cable
(not included)

STB, VCR,
DVD recorder, etc.

Refer to the operating
instructions of the respective
devices for the optimal
connections.

Main unit

≥This unit can decode the surround signal from the Set Top

Box (Satellite receiver, Cable box, etc.).

Press [EXT-IN] several times to select “D-IN 2”
(DIGITAL IN 2*).
* “(CABLE/SAT)” is displayed next to DIGITAL IN 2 when

set for CABLE/SAT AUDIO input. (

> 25, Setting the TV

audio for VIERA Link “HDAVI Control”)

≥For connections between this unit and the TV, refer to “TV

connections”. (

> 9)

≥If you have various sound sources and this unit’s

terminals are not sufficient, connect them to the available
inputs on the TV and the TV output should then be
connected to the “AUX” or “OPTICAL 1(TV)” terminal of
the main unit.
Refer to the operating instructions of the TV, video
cassette recorder, DVD recorder or Set Top Box for
settings to output its audio via AUDIO OUT or OPTICAL
OUT terminal of the TV.
– In some cases the audio signal will only be output as

2ch audio from the TV. In this case, connect the Set Top
Box (Satellite receiver, Cable box, etc.) that will be used
most commonly with multi-channel audio to this unit’s
“OPTICAL 2(STB)” terminal.

TIPS

FM

ANT

75

Ω

Main unit

FM Indoor antenna

1

Using an FM indoor antenna

Using an FM outdoor antenna
Use outdoor antenna if FM radio reception is poor.

≥Disconnect the antenna when the unit is not in use.

≥Do not use the outdoor antenna during an electrical storm.

Main unit

FM

ANT

75

FM

ANT

75

Antenna plug (not included)

75 Ω

coaxial cable*

(not included)

FM outdoor antenna
[Using a TV antenna
(not included)]
The antenna should be installed by a
competent technician.

Main unit

Adhesive
tape

FM indoor antenna (included)
Affix this end of the antenna
where reception is best.

1

*

Rework your outdoor antenna’s 75 Ω

coaxial cable as follows.

7 mm (

9

/

32

)

10 mm (

13

/

32

)

Peel back

10 mm (

13

/

32

)

Remove a piece of the
outer vinyl insulator.

Carefully pull the tabs

apart to remove the cover.

Attach the cover.

Install the coaxial cable.

Clamp the cable conductor,
and wind it on so that it does
not contact anything else.

Clamp with pliers

Ω

Ω

Getting s

tar

te

d

BTX70PP_eng.book 10 ページ 2009年6月24日 水曜日 午後3時42分

Advertising