Panasonic SC-BTX70 - Manual (Page 11)

11
RQT9479
Broadband Network Connections
AC power supply cord connection
The following services can be used when this unit is connected to the Internet via a broadband connection.
≥Firmware can be updated (> 29)
≥You can enjoy the BD-Live (> 19)
≥You can enjoy the VIERA CAST (> 29)
≥Use shielded LAN cables when connecting to peripheral devices.
≥With installation where your broadband modem is connected directly to your PC, a router must be installed.
≥Use a router that supports 10BASE-T/100BASE-TX.
≥In case all available connection on your router is being used, a hub or switch can be installed to provide additional connections.
≥When operating the VIERA CAST, use high-speed Internet service no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps
for HD (High Definition) picture quality by your local broadband company.
– If using slow Internet connection, the video may not be displayed correctly.
≥After physically connecting this unit to your broadband connection, some configuration is required. (> 30)
≥Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Main unit
LAN
Shielded LAN cable
(not included)
Internet
Broadband router, etc.
Telecommunications equipment
(modem, etc.)
NOTE
1 AC power supply cord
Main unit
1
AC power supply cord (included)
To a household AC outlet
(AC 120 V, 60 Hz)
Connect only after all other connections are complete.
Conserving power
The main unit consumes a small amount of AC power, even when it is turned off (approx. 0.2 W). To save power when the unit is not to
be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
NOTE
TIPS
Getting s
tar
te
d
BTX70PP_eng.book 11 ページ ２００９年６月２４日 水曜日 午後３時４２分