Panasonic SC-BTX70 - Manual (Page 9)

9
RQT9479
TV connections
≥When connecting with the video cable, set “High Clarity Sound” in the on-screen menu to “Off” (> 33).
(Otherwise, the video will not be output.)
Optional connections
≥For those who want to enjoy higher picture quality and have a TV equipped with an HDMI terminal.
– Do not disconnect the video cable even if the HDMI cable is connected. Some features may not be displayed.
≥For those who have a Set Top Box (Satellite receiver, Cable box, etc.) or video cassette recorder (> 10).
When connecting with an HDMI cable
≥ If there is more than one HDMI terminal, refer to the operating instructions for the TV to determine terminal to connect to.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft),
RP-CDHG50 (5.0 m/16.4 ft), etc.
≥This unit incorporates HDMI (Deep Color, x.v.Color TM , High Bit rate Audio) technology. ( > 51, 52)
≥When outputting 1080p signal (> 36, “HDMI Resolution”), please use HDMI cables 5.0 m (16.4 ft) or less.
NECESSARY SETTINGS for HDMI connections
“HDMI Audio Output” : “Off” (
> 36)
– With this connection, you can use VIERA Link “HDAVI Control” ( > 25).
To enjoy TV audio from this home theater system’s speakers
*1 You can enjoy the audio from your TV through this home theater system’s speakers by connecting to the “AUX” terminal or “OPTICAL
1(TV)” terminal. ( > 24)
*2 This is the preferred connection for optimum sound and surround sound.
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the TV for the settings
necessary to output its audio from the digital audio output to your home theater system. Only Dolby Digital and PCM can be played
with this connection.
– After making this connection, make settings to suit the type of audio from your digital equipment (
> 24).
1 Video cable
OPTICAL
OUT
L
R
AUDIO OUT
VIDEO IN
AV IN
HDMI AV OUT
VIDEO OUT
OPTICAL 1(TV) OPTICAL 1(TV)
1
OPTICAL 1(TV)
VIDEO OUT VIDEO OUT
HDMI AV OUT AUX Audio cable* 1
(not included)
The optical digital audio cable can be used
when connecting to televisions with optical
out terminals (
above). Main unit
HDMI cable (not included)
TV
Optical digital audio cable* 1,2
(not included)
Video cable (included)
1
NOTE
TIPS
Getting s
tar
te
d
BTX70PP_eng.book 9 ページ ２００９年６月２４日 水曜日 午後３時４２分