Playback, Basic operations, Radio/ext-in – Panasonic SC-BTX70 User Manual

Page 16

Advertising
background image

16

RQT9479

Basic operations

Instructions for operations are generally described using the remote control in these operating instructions.

Preparation

Turn on the TV and select the appropriate video input on the TV.

1 Press [

Í] to turn on the unit.

2 Insert the media. (B see above)

Play starts.

≥If a media with data in different file formats is inserted, the file

selection menu is displayed. Press [

3, 4] to select the desired file

format and press [OK].

≥If a menu is displayed, press [3, 4, 2, 1] to select the item and

press [OK].

≥If the screen prompting you to use the color buttons appears,

continue to operate with the color buttons on the remote control.

≥If play does not start, press [1PLAY].

≥When [1PLAY] is pressed with the sliding door open to either side,

the sliding door will close. If a disc is inserted, playback will start.

≥Disc playback will stop and the sliding door will open if [iPod < OPEN/CLOSE] is pressed twice during disc playback.

– The resume play function may operate with some discs.

≥Be sure to press [DISC < OPEN/CLOSE] to open and close the sliding door. Forcing the sliding door open or close, will damage the

unit.

≥Keep your fingers away from the sliding door when it is moving to avoid minor injuries.

DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [STOP] when you finish to preserve the unit’s

motor and your television screen.

≥If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.

≥The producers of the disc can control how discs are played. So you may not always be able to control play as described in these

operating instructions. Read the disc’s instructions carefully.

≥When playing a set of two or more BD-Video discs, the menu screen may continue to display even if the disc has been removed.

To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu

[BD-V]

The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method,
refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [

3, 4, 2, 1] to select the item and press [OK].

≥Pop-up menu also appears by pressing [SUB MENU] and selecting “Pop-up Menu”.

≥Press [POP-UP MENU] to exit the screen.

≥It may take time to read BD-Video discs that include BD-J (> 51).

Stop

Play

Pause

,VOLUME

Skip/Search/Slow-motion

BD/SD, iPod

RADIO/EXT-IN

RADIO/EXT-IN

Headphones (not included)
Headphone plug type:

‰3.5 mm (

1

/

8

z) stereo mini plug

≥Reduce the volume before connecting.

≥Audio is automatically switched to 2-channel stereo.

≥To prevent hearing damage, avoid listening for prolonged periods of time.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Label facing up

1 Press [DISC

< OPEN/CLOSE] to open the sliding door.

2 Place the disc onto the spindle in the center and

then push the disc down until it clicks into place.
≥When inserting or removing a disc, tilt the disc so

as not to touch the sliding door.

≥To remove the card, press on the center of the card

and pull it straight out.

≥ Press [DISC < OPEN/CLOSE] again to close the sliding door.

≥To remove the disc, while pressing down on the spindle,

grasp the edge of the disc and gently lift it out.

≥DVD-RAM: Remove the discs from their cartridges before use.

≥Insert double-sided discs so the label for the side you

want to play is facing up.

Insert the card with the cut-off
corner on the left.
≥Press on the center of the

card until it clicks into place.

Inserting or removing a disc.

Inserting or removing an SD card

1 Push

$ to open the SD card door.

2 Insert the SD card into the SD card slot.

NOTE

TIPS

Playback

BTX70PP_eng.book 16 ページ 2009年6月24日 水曜日 午後3時42分

Advertising