Parts and their functions – Panasonic AW-HE100N User Manual
Page 13
13
9
PRESET/LIMIT button
This is used to register the settings in the preset
memories or set or release the limiters.
When a preset memory call button is pressed while the
PRESET/LIMIT button is held down, the information on
the unit’s current direction and other settings is registered
in the call button.
Preset memory call buttons [1] to [1] correspond to the
unit’s No.1 to No.1 preset memories.
Furthermore, the pan and tilt movement range limits
(limiters) are set and released by operating the PRESET/
LIMIT button and the pan/tilt buttons ([
], [
], [
] and
[
]). For details, refer to “Setting/releasing the limiters”
(page 54).
Pan-tilt buttons and menu operation buttons
[
] [
] [
] [
] [
]
These are used to change the unit’s direction.
The unit is tilted in the up/down direction using the [
]
and [
] buttons and panned in the left/right direction
using the [
] and [
] buttons.
The [
] button does not work during tilting and panning.
When the [
] or [
] and [
] or [
] buttons are pressed
at the same time, the unit moves diagonally.
The buttons are used for menu operations when the unit
displays the menus.
The menu items are selected using the [
] and [
]
buttons, and the values for the menu items are changed
using the [
] and [
] buttons.
When a selected item has a sub-menu, the sub-menu will
be displayed by pressing the [
] button or [
] button.
While the menus are displayed, the [
] and [
] button
have the same functions.
Bear in mind, however, that if the [
] button is pressed
when it is possible to change a value, the value will be
changed by the button.
FOCUS buttons [F] [N]
These are used to adjust the lens focus manually when
the manual setting is established for the lens focus.
The focus is adjusted in the far using the [F] button and in
the near using the [N] button.
A/FOCUS button
This is used when automatically adjusting the lens focus.
M/FOCUS button
This is used when manually adjusting the lens focus.
The FOCUS buttons ([F] and [N]) are used when
performing the actual adjustment.
OPT buttons [ON] [OFF]
These are used for future expansion of the functions.
They are not used at the present time.
HOME button
When this is pressed for two seconds, the unit’s direction
(panning or tilting) returns to the reference position.
ZOOM buttons [T] [W]
These are used to adjust the lens zoom.
The zoom is adjusted in the wide-angle using the
[W] button and in the telephoto using the [T] button.
FAST button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the high speed.
The same applies for the movement speeds of panning
and tilting when the information in a preset memory has
been called.
SLOW button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the low speed.
The same applies for the movement speeds of panning
and tilting when the information in a preset memory has
been called.
A/IRIS button
This establishes the setting for adjusting the lens iris
automatically in line with the light quantity.
M/IRIS button
This establishes the setting for adjusting the lens iris
manually.
The IRIS+ and IRIS– buttons are used when performing
the actual adjustment.
IRIS+ button
This is used to adjust the lens iris in the opening
direction.
IRIS– button
This is used to adjust the lens iris in the closing direction.
The iris is automatically changed to the automatic
adjustment if the gain is set to the automatic
adjustment while the iris is at the manual adjustment
setting.
If the gain is later returned to the manual adjustment
setting, the iris is also returned to its original value.
The gain is automatically changed back to its
previous value if the iris is set to the manual
adjustment while the gain is at the automatic
adjustment setting.
Notes
Parts and their functions