Specifications – Panasonic AW-HE100N User Manual
Page 61
61
White balance:
AWC A, AWC B, ATW, 300K, 5600K
Black balance:
Auto
Chroma amount variability:
7 levels variability
Shooting mode (SCENE FILE):
Halogen, Fluorescent, Daylight, User
Color bars:
SMPTE (in the SD mode), FULL BAR (in the HD mode)
Output format:
HD: 1080: 59.94i, 70: 59.94p
SD: 480: 59.94i, 9.97psF
Video output:
• Composite: 1.0 Vp-p/75
(BNC
1)
• HD/SD analog component or SD Y/C (VGA 15P
1)
Y/Pb/Pr Y: 1.0 Vp-p/75
, Pr/Pb: 0.7 Vp-p/75
(VGA 15P
1)
Y/C
Y: 1.0 Vp-p/75
, C: 0.86 Vp-p/75
(burst) 480: 59.94i, 9.97psF
In the Y/Pb/Pr mode, HD or SD can be selected.
In the SD mode, Y/Pb/Pr or Y/C can be selected.
In the Y/C mode, the VBS signal is output to the Y pin of the VGA 15P output
connector, the Y signal to the Pb pin and the C signal to the Pr pin.
The SETUP mode can be selected only in the composite or the Y/C mode. Setup is
not available for other signals.
Synchronization system:
Internal/External synchronization (BBS or VBS, BNC
1)
[Pan-tilt head unit]
Installation method:
Stand-alone (Desktop) or suspended (Hanging)
To ensure safety, the unit must be secured using the accessory brackets.
Be sure to ask a qualified contractor to install the unit.
Controller connections:
Connecting cable: 10BASE-T (UTP category 5) straight cable,
Max. 380 ft. (1000 m)
(Control only: Use of an external device or some other means must be
provided separately in order to extend the video signal connections.)
Protocol: RS-4A, AW series protocol
Pan range:
±175°
Tilt range:
–40° to +10°
Operating speed:
Max. 60°/s
Stop accuracy:
Less than ±3´ (0.05°)
Noise level:
NC30 (during operation at 30°/s),
NC35 (during operation at 60°/s)
Specifications