Primera Technology Primera Bravo Automated Opitcal Disc Duplication & Printing System II - Manual (Page 14)

10 Hardware and Software Set-Up
Refer to the following steps when loading discs in to the
Publisher:
• Open the front cover of the Publisher
• The Publisher will automatically position the cartridge
carrier and Robotic Disc Transporter to the center position
allowing for easy access to the bins.
• Load the Input Bin (the bin located on the right-hand side
of the Publisher) with 25 blank discs and place the bins on
the mounting pegs.
510873PM.qxd 4/3/2006 4:56 PM Page 10
TOC INDEX