Primera Technology Primera Bravo Automated Opitcal Disc Duplication & Printing System II User Manual

Page 58

Advertising
background image

54 Creating Discs on a Mac

You will see both the Color and Monochrome Ink Levels are

displayed. The Color Ink Level represents the lowest color in

your cartridge. For instance, if your cartridge has 80% cyan

50% yellow and 65% magenta ink remaining, the level reported

would be 50%. You will also see the following buttons:

Clean Cartridge

Cartridges that sit idle in the Bravo for a period of time may

start to experience some drying of ink in the tiny nozzles that

make up the print head. Clicking the Clean Cartridge button

will cause the bravo to pick a disc and place in into the printer

tray. The Bravo will then print a simple pattern that will flush

ink through the nozzles. The test pattern will also show you if

any nozzles are clogged. In the pattern you will see some

diagonal lines which should be continuous; breaks in those

lines indicate a clogged nozzle. Please note that it may require

more than one cleaning to fully clear all nozzles. If the nozzles

are not fully clear after a few cleaning prints, it may be

necessary to remove the cartridge and actually clean the print

head by gently wiping the nozzles with a moist cloth or paper

towel and replace it in the Bravo. If this fails, the cartridge

may be empty and in need of replacement.

Change Cartridge

If you need to change cartridges, it is a good idea to use the

Change Cartridge button in the Configuration Utility. This

ensures the most accurate tracking of ink levels. To change a

cartridge, click the Change Cartridge button. The cartridge

holder will move to the center of the Bravo to make it easier to

install the cartridges. Lift the top cover and install the

cartridges and described in section 2-C of this manual. You

will be prompted to let the system know whether or not you

are installing a new or used color or monochrome cartridge.

Once installed, click the OK button and the system will update

your cartridge levels.

Note: It is recommended that you perform and Alignment Calibration

Print after installing a new cartridge.

510873PM.qxd 4/3/2006 4:57 PM Page 54

TOC

INDEX

Advertising