Primera Technology Primera Bravo Automated Opitcal Disc Duplication & Printing System II User Manual

Page 56

Advertising
background image

52 Creating Discs on a Mac

are using. For the discs that Primera sells, use the following

guide for Inner Diameter:

− 38.3 mm for Primera's Tuff-Coat CDR
− 24.9 mm for the Hockey Rink Disc, Business

Card Disc and 80mm CD

Outer Margin

The Outer Margin refers to where the printing will cut off

around the outer edge of your disc. The size of the

printable surface can vary from one type of media to the

next. This allows you to set the outer margin in millimeters

allowing you to print all the way to the edge regardless of

the type of disc you are using.

Config Utility

This button launches the Configuration Utility. This Utility

is also available in the Print Center by selecting the Disc

Publisher and clicking the Configure Icon. This utility is

used to report ink levels, clean and change ink cartridges,

and align your color and black cartridges for optimal print

quality. In addition, this utility will allow you to center and

adjust your printed image. Refer to section 4-F of this

manual for a detailed description of this program.

Enable Low Ink Warning

The Low Ink Warning basically keeps you from printing

discs if one ore more of the colors in your ink cartridge are

running out. Your Bravo monitors the amount of ink used

when printing and will stop printing if one or more of

your colors is within 10% of being empty, and the LEDs on

the top will flash in unison. If you press the Cartridge

button on the top of the Bravo it will continue to print, but

you will want to closely monitor the discs that print. If

discoloration occurs, you are most likely out of one or

more colors and will want to change cartridges. Please

refer to section 4-F for instructions on how to change and

align ink cartridges.

Save As Default

The Save As Default button will save the current settings

as the system-wide defaults.

Restore Defaults

The Restore Defaults button will restore the driver settings

to the factory defaults.

510873PM.qxd 4/3/2006 4:57 PM Page 52

TOC

INDEX

Advertising