Primera Technology Primera Bravo Automated Opitcal Disc Duplication & Printing System II - Manual (Page 31)

Creating Discs on a PC 27
collect the discs. This optional bin hangs off of the edge of a
table and attaches just under the front lip of the Bravo. This
kit is available through your reseller. Kiosk mode is enabled
as follows:
1. In PrimoDVD 2.1 click Robotics then Options from the
main menu.
2. In the Options dialog box, check the option labeled Enable
Kiosk Mode.
3. If you would like the Bravo to physically print the word
"Reject" on rejected discs, select the Print "Reject" option.
Otherwise, rejected discs will simply be ejected with no
printing at all.
F. COPYING A CD OR DVD
Now, you're ready to start an actual recording job. In this
example, we'll perform a simple disc to disc copy. More
detailed information regarding other types of jobs (data discs,
Audio CD, etc.) can be found in the Primo DVD Help files
under the Help Menu - Get Help.
Disc to Disc copy can be used to copy any CD or DVD master.
This job type reads the master disc from a specified CD/DVD
drive on your system to the hard drive of your computer.
(This assumes you have checked "Make a temporary image on
hard drive and copy from there") The master is stored in the
510873PM.qxd 4/3/2006 4:56 PM Page 27
TOC INDEX