Profoto Pro-7 - Manual (Page 2)

Safety Instructions
Profoto generators and flash heads are part of a complete professional lighting system.
Please read the instruction manual carefully before use. Flash tubes and modelling lights
emit considerable heat and can be dangerous if not used properly. Always unplug the lamp
cable from the generator before changing modelling light, glass cover or flash tube.
Under no circumstances are generators or heads to be opened! There is high voltage inside
the generator! Service is only to be carried out by authorised personnel.
.
Never connect accessories of other brands without consulting an
authorised service station.
.
Do not touch hot glass or metal parts.
.
Do not obstruct ventilation.
.
Do not connect the lamp head with the transport cap in place.
.
Never place filters or diffusing material directly onto glass covers, flash tubes or
modelling lights.
.
Never position the light extremely close to people.
.
When mounting umbrellas, do not touch flash tubes or modelling lights
with the metal shaft – risk of high voltage.
.
Always use a grounded power supply/mains outlet.
.
Protect the flash equipment against moisture, condensation, heat, sand and dirt.