PYLE Audio FWM352 - Manual (Page 17)

English
17
CD/MP3-CD Operations
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUF ................ tracks of the entire disc are
played in random order
SHUF REP ALL…repeats the entire disc
continuously in random order
REP ALL ........... repeats the entire disc/
programme
REP ................... plays the current track
continuously
1
To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2
Press PLAY/PAUSE 2; to start playback if in
the STOP position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective
SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
● You can also press STOP 9 to cancel your play
mode.
Note:
– The SHUFFLE function cannot be used
simultaneously with PROGRAM.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press DISC 1/2/3 (or CD 1/2/3 on the remote
control) to select a disc.
3
In stop mode, press PROGRAM to start
programming.
➜
PROG starts flashing.
4
Press í or ë repeatedly to select the desired
track.
● For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
5
Press PROGRAM to store the track.
6
To end programming, press STOP 9 once.
➜
PROG stays and the programme mode
remains active.
7
To start programme play, press PLAY/PAUSE
2;.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If you attempt to programme more than 40
tracks, "
PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 25 seconds, the system will exit the
programme mode automatically.
To review the programme
● Stop playback and press í or ë repeatedly.
● To exit review mode, press STOP 9.
Erasing the programme
● Press STOP 9 once when playback is stopped
or twice during playback.
➜
PROG disappears and " CLEAR" is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
pg001-027_M352_22_Eng 2005.12.23, 15:53 17