PYLE Audio FWM352 - Manual (Page 8)

8
English
AM ANTENNA
FM ANTENNA
AUX/CDR
R L
SPEAKERS 6 Ω
R
+
-
L
A
B
C
Preparations
Rear connections
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
Fix the claw
to the slot
1 2
3
MW ANTENNA
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
AC power cord
Speaker
(right)
Speaker
(left)
FM antenna MW antenna
pg001-027_M352_22_Eng 2005.12.23, 15:53 8