PYLE Audio FWM352 - Manual (Page 25)

English
25
Specifications
AMPLIFIER
Output power ...................................... 2 x 60 W MPO
.................................................................... 2 x 30 W RMS (1)
Signal-to-noise ratio .......................... ≥ 60 dBA (IEC)
Frequency response ....................... 125 – 16000 Hz
Input sensitivity
AUX/CDR In ..................................................... 500 mV
Microphone .......................................................... 3.5 mV
Output
Speakers .................................................................... ≥ 6 Ω
Headphones ............................................................. 32 Ω
(1) (6 Ω, 1 kHz, 10% THD)
CD/MP3-CD PLAYER
Number of programmable tracks ......................... 40
Frequency response .......... 125 – 16000 Hz -3dB
Signal-to-noise ratio .......................................
≥ 75 dBA
Channel separation .......................... ≥ 50 dB (1 kHz)
Total harmonic distor tion ................................. < 0.6%
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
(128 kbps advised)
Sampling frequencies ....................... 32, 44.1, 48 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave rang ................................... 531 – 1602 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
MW ............................................................ Loop antenna
TAPE PLAYER
Frequency response
Normal tape (type I) ...... 125 – 8000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................. ≥ 40 dBA
Wow and flutter .............................................. ≤ 0.4% JIS
SPEAKERS
System 1-way; 1 port bass reflex
Impedance ........................................................................ 6
Ω
Woofer ................................................................... 1 x 5.25"
Tweeter .......................................................................... 1 x 2"
Dimensions (w x h x d) . 222 x 310 x 220 (mm)
Weight ................................................................ 2.9 kg each
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power ..................................... 220 – 240 V / 50 Hz
Power Consumption
Active ......................................................................... 70 W
Standby ..................................................................
≤ 15 W
Eco Power standby .......................................... ≤ 1 W
Dimensions (w x h x d) .. 265 x 310 x 384 (mm)
Weight (without speakers) ................................. 5.7 kg
Specifications and external appearance are
subject to change without notice.
pg001-027_M352_22_Eng 2005.12.23, 15:53 25